0 $0.00
Blue Boar Master Electrician Kit
Reviews 1 to 3 of 3
Joe
I just recently got into wood working and most of my projects require various hole sizes. I acquired a dozen dozen hole saws by Lenox, Irwin, DeWalt, etc., to do my bidding, but after reading a couple of reviews on this kit and having some positive experience with a Lenox one tooth hole saw/cutter, I decided to give Blue Boar a shot. I'm pretty amazed at the work these hole saws can do. They have exceeded my expectations. I'm shocked that regular hole saws aren't done away with yet! These hole saws/cutters really make it easy and fast! MUCH MUCH faster than the regular hole saws you see in the stores today. I don't know why this design hasn't caught on???
Stan
Great hole saws, I've used them a half dozen times now. They cut like a chain saw, so there's lots of wood chips when the hole is made. It does put a little stress on the drill having only 4 cutting teeth and I have to use water pump pliers to get the chuck loose after using one of the larger hole saws. It saves a lot of time compared to using the standard hole saws and they don't smoke and overheat like the standard ones. Cleaning out the wood is effortless and sometimes I don't even need a screwdriver to clear it out.
Brad
Very fast cutting hole saws and top performance with my 18 volt cordless drills. I no longer need my large angle drill or extension cords with these cutters.
Long life even with MDF and particle board materials like Advantech or plywood where bi-metal dull very quickly. I use them even
on Hardi board.
The arbor adapter seemed a little loose but then I realized that it did not affect performance of the hole cutters but made it a lot easier to remove them without needing a screw driver to pry them off.
Their brad point pilot bit has been handy for hard woods and plywood and does not dull quickly like the spade bits I was using before.
Carry case is top notch. Very strong and good latches so it does not open in the back of my truck. Survived a 4 foot fall onto concrete with no damage.
Long life even with MDF and particle board materials like Advantech or plywood where bi-metal dull very quickly. I use them even
on Hardi board.
The arbor adapter seemed a little loose but then I realized that it did not affect performance of the hole cutters but made it a lot easier to remove them without needing a screw driver to pry them off.
Their brad point pilot bit has been handy for hard woods and plywood and does not dull quickly like the spade bits I was using before.
Carry case is top notch. Very strong and good latches so it does not open in the back of my truck. Survived a 4 foot fall onto concrete with no damage.
My Account
Reviews
- I bought this as a gift to my son who built a new home and had lots of holes to put into...Jack
- Read All Reviews...
Testimonials
The X-305 I bought is great. Perfect, custom sized holes with controllable punch through. Works...
Kalo
It will save you time and money, plus provide exact size holes every time.
Bill, Home Theater Installer
I have had great success with the product. It works wonderfully... two contractors watched me...
Cliff - Electrician
Your tool is well engineered and holds up to a great deal of stress. This includes a recent...
Scott S
The X-230 Works great. Hardi cement board can be a bear to cut, but this tool makes the job very...
E. Ebey, Contractor
