Clearance

Dual Arbor and Hole saw starter case kit with 3 pilot bits includes:
• Heavy duty molded case
• Carbide tipped masonry pilot drill bit
• Porcelain pilot drill bit
• 5/8”-18 thread   2-pin hole saw arbor adapter with HSS pilot bit
• Use 5/8”-18 2-pin mount for hole saws 1-1/4” and larger and ½”-20 adapter for smaller hole saw sizes

Technical Details
• 4 hole saws for the price of 3
• 2-1/2" (57mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 4 hole saws for the price of 3
• 2-5/8" (67mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 4 hole saws for the price of 3
• 3" (76mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 4 hole saws for the price of 3
• 3-1/2" (89mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 4 hole saws for the price of 3
• 3-5/8" (92mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 4 hole saws for the price of 3
• 4-1/4" (108mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 4 hole saws for the price of 3
• 6-1/4" (159mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

b>Technical Details
• 1-1/2" (38mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 2 TCT carbide teeth
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 1-5/8" (41mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 2 TCT carbide teeth
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 1-3/4" (44mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 2 TCT carbide teeth
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 2-1/16" (52mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• Cut 3 times as large a hole using cordless hand drills than with a bi-metal hole saw
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 2-1/4" (57mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide tooth
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 2-1/2" (57mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 2-9/16" (65mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 2-5/8" (67mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 2-3/4" (70mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 3" (76mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 3-1/8" (80mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 3-3/8" (86mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 3-1/2" (89mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 3-5/8" (92mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 4" (102mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

b>Technical Details
• 4-1/8" (105mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 4-1/4" (108mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 4-1/2" (115mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 5" (127mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 5-1/4" (133mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 5-1/2" (140mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

Technical Details
• 5-3/4" (146mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***