Technical Details:
• 1-1/2 Inch Stucco and Fiberglass tungsten carbide tipped TCT hole saw
• 8mm carbide tipped pilot bit included
• 2-1/8 inch cutting depth
• Uses a standard 5/8 inch – 18 thread 2 pin arbor (NOT INCLUDED)
• Ejection spring included for fast plug removal – pushes the wood behind the stucco out
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic
• Can be used with Hole Pro XL Arbor and XL Shield Kit (HP1168-71) for dust protection.
Designed with deep side gullets for rapid cutting and fast plug removal of holes in masonry and wood and composite materials.
Engineered with a unique tooth design and using premium grade tungsten carbide tips, the hole cutters are able to withstand the demands of cutting through masonry while maintaining a cutting edge that cuts effectively through hard and soft wood, plywood, OSB, and chipboard
See stucco hole saw cutter using a Hole Pro Dust Shield https://holecutterstore.com/hole-pro-abs-dust-shields-arbor-adapters-and-vacuum-adapters.html
Tim –
Excellent for cutting holes in stucco siding as the large tungsten carbide teeth cut though the stucco and the metal lath and the plywood sheating. Before getting this we would be line drilling and chiseling and then cutting out the lath and sheathing and it would take more than 40 minutes per hole. Now we cut the hole in less than a minute. The spring on the drill bit pushes out the stucco plug and makes it easy to clear the hole cutter to make another hole.
This hole cutter works with our existing 5/8″ 18 thread arbors.