0 $0.00
Customer Reviews
Reviews 1 to 25 of 153
Jason about 2-1/2" Carbide Hole Saw Cutter
the cutting through many inches of wood was quick and with little difficulty. a really good tool. used a lot but still as sharp as day I got it
Mark about 2-5/8" Carbide Hole Saw Cutter
I have been using this product for over 3 years now. Great performance in wood. goes like hot knife through the butter! Good on wood! Lasts a long time
Brandon about 2-1/2" Carbide Hole Saw Cutter
Very fast cutting hole saws and top performance with my 18 volt cordless drills. I no longer need my large angle drill or extension cords with these cutters.
Long life even with MDF and particle board materials like Advantech or plywood where bi-metal dull very quickly. I use them even on Hardi board.
Long life even with MDF and particle board materials like Advantech or plywood where bi-metal dull very quickly. I use them even on Hardi board.
Brandon about 2-1/2" Carbide Hole Saw Cutter: 4 PK for Price of 3
Very fast cutting hole saws and top performance with my 18 volt cordless drills. I no longer need my large angle drill or extension cords with these cutters.
Long life even with MDF and particle board materials like Advantech or plywood where bi-metal dull very quickly. I use them even
on Hardi board.’.
Long life even with MDF and particle board materials like Advantech or plywood where bi-metal dull very quickly. I use them even
on Hardi board.’.
Stan about 2-1/2" Carbide Hole Saw Cutter
This is THE best hole cutter I have used. Cutting through 1" ply and even 1" ply with some pine backing was super-easy and super fast. The saw really does churn out the cuttings as you work - just as advertised. Also, getting the cut-outs cleaned out for the saw is easy and fast.
I was even cutting holes easily with my wimpy 14.4V Panasonic cordless - I tried it for the heck of it, and it cut through 8-9 holes easily for a recent project.
I was even cutting holes easily with my wimpy 14.4V Panasonic cordless - I tried it for the heck of it, and it cut through 8-9 holes easily for a recent project.
This is THE best hole cutter I have used. Cutting through 1" ply and even 1" ply with some pine backing was super-easy and super fast. The saw really does churn out the cuttings as you work - just as advertised. Also, getting the cut-outs cleaned out for the saw is easy and fast.
I was even cutting holes easily with my wimpy 14.4V Panasonic cordless - I tried it for the heck of it, and it cut through 8-9 holes easily for a recent project.
I was even cutting holes easily with my wimpy 14.4V Panasonic cordless - I tried it for the heck of it, and it cut through 8-9 holes easily for a recent project.
Roger about 4-1/4" Carbide Hole Saw Cutter
I have hardware cloth in my cieling, so a regular hole saw failed very quickly. This thing ripped two holes in my ceiling and did not even notice. It is a shame I do not have dozens more to do, because this tool looks ready for real work.
Craig about 4-1/4" Carbide Hole Saw Cutter
Best hole saw I’ve ever owned. Easily cut 100 recess cans in so far with zero damage to the teeth. About 15 holes were cut through plaster and wire mesh. 30 holes cut with lath and plaster.
Chuck about 2-5/8" Carbide Hole Saw Cutter
These hole saws cut through hardibacker like butter! Highly recommend!
Thomas about 6-1/4" Carbide Hole Saw Cutter
I used this on inch thick plywood subflooring and was able to cut quickly using a DeWalt 18v cordless drill on its medium speed setting. Tried first hole on the lowest speed setting and it was OK but would jerk a little when it hit a harder section of the plywood. At the middle speed setting it was much smoother. Even on the low speed setting it was a whole lot smoother and easier to use than even the small sizes of the Lenox One Tooth hole cutters which are plain scary to use in a hand held drill
Thomas about 6-1/4" Carbide Hole Saw Cutter: 4 PK for Price of 3
I used this on inch thick plywood subflooring and was able to cut quickly using a DeWalt 18v cordless drill on its medium speed setting. Tried first hole on the lowest speed setting and it was OK but would jerk a little when it hit a harder section of the plywood. At the middle speed setting it was much smoother. Even on the low speed setting it was a whole lot smoother and easier to use than even the small sizes of the Lenox One Tooth hole cutters which are plain scary to use in a hand held drill.
Clean holes in seconds and the cut plug comes out in seconds. Long tooth life even in MDF, particle board, and plywood. I will never go back to using bi-metal hole saws for anything but metal
Clean holes in seconds and the cut plug comes out in seconds. Long tooth life even in MDF, particle board, and plywood. I will never go back to using bi-metal hole saws for anything but metal
Frank about 6-1/4" Carbide Hole Saw Cutter
Great saw! Really rips through the material. Not for the inexperienced.
Jack about 3-1/2" Carbide Hole Saw Cutter
This thing cuts about 5 times faster than bi-metal hole saws!
Steve about 3" Carbide Hole Saw Cutter
Excellent product. Admittedly, only used it once. But drilled through a high-quality conference room table - so no room for errors. And this product delivered perfection.
Steve about 3" Carbide Hole Saw Cutter: 4 PK for Price of 3
Excellent product. Admittedly, only used it once. But drilled through a high-quality conference room table - so no room for errors. And this product delivered perfection.
Travis about 3" Carbide Hole Saw Cutter
I have drilled 4 inches through alabaster and used the bit to make wooden wheels for a toy car. This bit cuts a lot better than high speed steel hole cutters that I have used in the past. I have had a little trouble with the bit getting loose from the separately purchased arbor as I back out the tool to clear chips. If I need another hole size, I will buy this brand again.
My Account
Reviews
- I have hardware cloth in my ceiling, so a regular hole saw failed very quickly. This thing ripped...Nick
- Read All Reviews...
Testimonials
It will save you time and money, plus provide exact size holes every time.
Bill, Home Theater Installer
Hi, Just wanted to let you know that we are absolutely thrilled with the hole cutter. Wow, did...
Mike, Coastal Electric
I have to say that your 6-3/8" carbide Grit hole saw cutter is the best! Cuts through plaster...
Bruce
I have been using my Hole Pro adjustable hole cutter for over 5 years, and I only need to buy...
Tom
We use the X-305 to install ceiling speakers in our whole house music systems. We get perfect...
Stuart, Home Theater Installer
